Besides applying furniture wisely, it’s significant to handle it cautiously. Safe handling and acting of furniture start with a basic realizing of how a piece is built. The 2d step is to plan cautiously.


Prior to catching a piece of furniture, find out how it’s put together and if any of its parts are removable or clastic. Be sure you acknowledge where the furniture is its firmest – broadly along a major horizontal element – and try to carry it from these points.

Then analyze the room and the route whereby the furniture is to be displaced. Look around to be sure you acknowledge where everything is. Describe potential problem. Light fixtures hanging low, for instances, or extending out from the wall might be destroyed or cause damage. Glass table tops are also easily damaged if bumped. If necessary, clear the way by moving or removing fragile or hindering items. Protect the furniture to be moved with soft padding or wrap it in a blanket pad. Aggrandizing, which will allow for additional insurance against breaking and extorting, is particularly significant if an item is going into storage.

Before displacing an item, be sure you acknowledge precisely where it goes next. Plan ahead to adapt the temperature and relative humidity in the new location so they’re the same as where the furniture currently is. Intense changes in temperature and humidness may stimulate splitting of joints and veneers.

Never rush once you’re displacing furniture. Scratches, dents, and gouges from bumps against door handles, room access, and other furniture are always more probable in haste. Each item requires to being approached separately, without haste, and with adequate manpower present.

Be sure you’ve a firm grip on the piece with both hands. Don’t wear cotton gloves. It’s necessary that hands not slip from a piece of furniture while it’s being displaced.

Never slide or cart furniture along the floor. The vibration may undo or break articulates, chip feet, break legs, etc., to say nothing of what carting does to the carpeting or finish on the floor. Whenever potential, apply trolleys or dolls for transporting heavy pieces.

Handling valuable furnishings needs a especial attitude: as a whole, movement ought to be accomplished at a slower pace. Here are a few quick hints for moving furniture in good order. Remember: If you do not break it, it does not have to be fixed!


  • Just as gymnasts act with “spotters” to grab them once they stumble, have assistants on hand to conduct the movers and so they do not crash into walls or other pieces of furniture
    • Foresee trouble; think through every step; plan ahead; and do everything with care
    • Be sure the road is clear and has no blockages, like narrow doorways or hanging chandeliers that may block the safe passage of furniture and movers
    • The following sections provide hints for moving particular types of furniture.


When arising a chair, call back that the seat rail is its firmest part, not the chair back. Frequently arising by the back, particularly the crest rail, will finally lead to breakage. For small chairs, lift by the side seat rails, one hand near the front on one side, the other near the rear on the other side.

When lifting a large chair or sofa, the rules are the same. Grab underneath the side frame, making a point to lift with your legs instead of your back. For upholstered chairs or sofas, place your hands underneath the frame to keep off adjoining the upholstery. If upholstery must be adjoined, apply cotton gloves. For chairs with slip seats, dispatch the slip seat and enclose and move it separately to prevent its being soiled or falling out during the move.


The firmest part of a table is broadly the forestage. Whenever possible, lift the table cautiously from the apron, never by the top or legs. Lifting on the top rather than the apron might break the glue-blocks holding the top to the frame or striping out the screws which hold the top on. Catching the legs, especially tables with long, baseless legs, will lead unnecessary stress on the leg and the joint associating it to the apron. Whenever possible, enclose padding around a table’s legs before moving it to preclude breaking away or breaking on the move.

If you’re moving a drop-leaf table, first decide supporting members act. Is the table leaf backed by a bracket or by a swing-leg? Bend the leaves down, and restrict them with padding and a tie band. If the support is supplied by a swing-leg or gate-leg, attach it in place as well. The only safe place to catch a drop-leaf table is underneath the end forestages. Catching by the legs, particularly swing-legs, will increase the probability of harm to them, and catching the table by the side leaves will often lead to breaking the long rule joint allowing the leaves to cast off.


When case pieces, particularly large ones, might look very different from tables and chairs, the same rules apply. Never attempt to move a big piece by yourself. A case piece needs at least 2 people. When a case piece requires may be acted by conducting it cautiously, keeping to the bottom as you’d a table or chair, it’s best to act the piece on a doll. A doll makes the move safer for both the movers and the object, and that’s all the more true for large objects.

First, test the piece. How was conjointly? And how may it separate? Take the piece apart as much as is possible. That’s, gets rid of the top piece of a cabinet from its base; dispatch the cornice or pediment, if there has been one.

If the carcass is hardly enough, dispatch an drawers to brighten the load and make the move more easygoing. Carry the drawers individually to the address. Nevertheless, if the carcass is debile and agitates from side-to-side, leave the drawers in place to allow for stableness and preclude further harm to the joints. Tall pieces not breaking into separate sections require to being set on their sides on a doll to preclude their topping over.

If the piece has handles, wrap them with padding. Padding protects the handles, the furniture surface (if the handles have swinging bales or drops), the movers, and the surroundings in case you bump up against anything.

Never catch a heavy piece such as a chest of drawers or bookcase by the cornice at the top. The attachment of the top to the base might be teased and pull apart from the rest of the piece.

Lift the piece straight up, applying your legs, not your back. Do not allow it to tilt, and don’t catch it by its hardware or any other bulges.


The moving project becomes progressively hard with objects being large and complex. Objects coming apart into many pieces or being clumsy need additional care and preparation. Because of their many breaks up grandfather and grandmother clocks are very hard to move.

Always dispatch the pendulum and weights from within the clock before performing anything else. These pieces are heavy and will harm the clock case if they crash into the side of the case. They might as well stimulate harm to the mechanism itself. Put on cotton gloves when you dispatch the pendulum and weights, to keep off corrosion of the metal pieces from skin contact.

Dispatch the hood from the top of the clock (they often slide forward), and lay it down to pack and move on an individual basis. Be sure the door to the case is barred or firmly closed before moving the clock. Apply bare hands, not gloves, for moving and packing the carcass of the case. For short moves, like those of only some feet, it’s allowable to lift by catching the narrow case from the underside of the border at the top of the waist, or center portion of the case, provided that the molding is securely accompanied with the case itself. For longer moves, or if that molding isn’t secure, the clock case ought to be carried flat like a coffin.